Spray foam insulation and framing inside a Toronto home before drywall

Drywall, Insulation & Taping Services

Complete Interior Systems, From Insulation to Finish

Explore our insulation, spray foam, drywall installation, taping and finishing services - including the systems we use, how they’re installed, and how each stage contributes to thermal performance, sound control and a smooth, finished interior.

What We Deliver

Drywall services for every project in the GTA

Insulation, drywall board and taping delivered end to end by one accountable crew - for general contractors, builders, property managers and homeowners across Southern Ontario.

Insulation & Spray Foam

Batt, blown-in and spray foam insulation solutions for thermal performance, sound control, air sealing and energy efficiency.

  • Batt, blown-in, open-cell & closed-cell spray foam
  • Vapour barrier installation
  • Attics, basements, walls, rim joists, joist & beam pockets
  • Installed in accordance with applicable Ontario Building Code requirements

Drywall Installation

Complete drywall installation for walls and ceilings, from layout and board hanging to fastening and corner preparation, creating the foundation for a smooth, seamless finish across residential, commercial and multi-unit projects.

  • Standard, fire-rated, moisture-resistant & acoustic drywall
  • Vaulted, coffered, curved & specialty applications
  • Corner bead installation & edge preparation
  • Prepared for smooth, seamless finishing

Taping & Mudding

Professional taping and mudding to conceal joints, corners and fasteners, creating a smooth, seamless surface ready for finishing and paint.

  • Joint taping, mudding & sanding
  • Corners, seams & fastener finishing
  • Level 4 & Level 5 finishes
  • Smooth, seamless & paint-ready surfaces

Insulation & Spray Foam

Insulation helps control heat transfer, improving indoor comfort and energy efficiency. Traditional insulation systems, such as batt and blown-in, provide thermal and sound-control performance, while spray foam insulation expands to fill gaps and cavities, providing insulation together with enhanced air sealing.

We work with batt, blown-in, open-cell and closed-cell spray foam, as well as vapour barrier systems, selecting the appropriate system based on the application and required thermal performance.

Spray foam insulation installation on a vaulted ceiling in Mississauga, Ontario Open-cell spray foam insulation between studs with electrical rough-in in Brampton, Ontario

Open-cell spray foam provides effective air sealing and sound control, while closed-cell spray foam offers a higher R-value per inch and greater moisture resistance. Required R-values, such as R-20 or R-22, as well as vapour-control requirements, vary depending on the building assembly, location and applicable code requirements.

Where required, insulation, spray foam and vapour barrier installations may be subject to inspection before the walls or ceilings are covered with drywall. The inspection verifies that the applicable insulation and building-envelope requirements have been met before the assembly is closed. Drywall installation proceeds once the required inspection has been completed and approved.

Drywall installation on a coffered ceiling in Vaughan, Ontario Drywall board hung on walls and ceiling in a Toronto condo

Drywall Installation

Drywall is a panel system used to create interior walls and ceilings, providing a smooth, durable surface that can be finished and prepared for paint or other decorative finishes.

Installation involves measuring and laying out the space, cutting the appropriate boards, hanging and fastening them securely to the framing. The board type and thickness are selected based on the location, building assembly and required performance.

We install standard, fire-rated, moisture-resistant and acoustic drywall, with different systems available to meet fire-resistance, moisture-control and sound-control requirements. Our crews also work with vaulted, coffered, curved and other specialty wall and ceiling applications.

Drywall Taping & Finishing

Drywall taping and finishing transforms installed drywall sheets into a smooth, continuous surface ready for paint or other finishes. The process begins by applying joint tape and compound to seams, corners and fasteners, followed by additional coats that are feathered and sanded to blend the joints into the surrounding surface.

Different types of joint compound (mud) can be used throughout the taping process. Taping and filling compounds are used for the initial coats, while finishing compounds have a finer, easier-to-sand consistency for the final coats, helping create a smoother and more uniform surface.

We provide Level 4 and Level 5 drywall finishes depending on the project and desired result. Level 4 is commonly used for standard painted surfaces, while Level 5 adds a skim coat across the entire drywall surface for greater uniformity, particularly where lighting or high-end finishes can make surface variations more noticeable.

Level 5 drywall taping and finishing on a staircase in Vaughan, Ontario
Drywall FAQ

Drywall and insulation questions
from GTA clients

Drywall installation costs vary based on total square footage, required finish level, and the number and complexity of corners and details. We measure the project on site and provide a detailed, no-obligation estimate based on the scope of work.

Level 4 is standard for most painted surfaces, while Level 5 adds a full skim coat for a smoother, more uniform finish.

Yes. We can supply and deliver all materials required for insulation, spray foam, drywall and taping. We also handle cleanup, debris removal and waste-bin coordination when required.

If materials are supplied by the client, we can provide installation-only services as well.

It depends on the application. Batt is cost-effective, while spray foam provides enhanced air sealing and higher R-value per inch.

Yes. Great North Drywall & Interiors carries Commercial General Liability (CGL) insurance and is registered with WSIB. Documentation can be provided upon request.

Start dates depend on project scope, current availability and, where applicable, required inspection approvals following insulation before drywall installation can begin.

Crews run out of our head office at 236 Chambers Avenue in York, Toronto, covering the Greater Toronto Area and Southern Ontario: Toronto, Mississauga, Brampton, Vaughan, Markham, Richmond Hill, Oakville, Burlington, Milton, Ajax, Pickering, Whitby, Oshawa, Aurora, Newmarket, King City, Caledon, Hamilton, Cambridge, Kitchener, Waterloo, Guelph, Barrie and Simcoe County.

Both. We work with general contractors, builders, developers and property owners on residential, commercial and multi-unit projects.

The process depends on the services selected. A full-scope project typically includes site assessment and estimate, service selection, contract signing, scheduling, material delivery, insulation and/or spray foam, required inspection approval, drywall installation, blown-in insulation where applicable, and taping and finishing.

Cleanup and debris removal are handled throughout the work through the final day of finishing. Clients can also hire us for individual services, such as insulation, drywall installation or taping only.

Yes. We work on residential, commercial and multi-unit projects, including new construction, renovations and interior upgrades.

Yes. We coordinate our work with other trades on active job sites, managing our scope and schedule to help keep the project organized and moving efficiently.

Standard drywall sheets are used for general walls and ceilings. Fire-rated sheets are designed for fire-resistant assemblies, moisture-resistant sheets for areas with higher humidity, and acoustic sheets to help reduce sound transmission between spaces.

The site should be accessible and reasonably clean so our crew can safely perform the contracted services. Where applicable, there should also be adequate space for a waste bin and clear access for material deliveries.

Yes, and that is the point of keeping both under one contractor. When the same company handles insulation, vapour barrier and board, nothing waits on a handover between two trades and there is one party accountable if something does not line up.

Taping reinforces the joints between drywall sheets with joint tape, while mudding applies joint compound over the tape, corners and fasteners to create a smooth, seamless surface.

Multiple coats are needed to build, smooth and blend the joints into the drywall surface. Each coat is applied wider and finer to create a seamless finish before sanding and painting.

It depends on the square footage and complexity of the project. For reference, our crew recently completed drywall installation for a 13,144 sq. ft. project in approximately four days.

Yes. Cleanup and debris removal are handled throughout the project, with waste-bin coordination when required, and a final cleanup once our work is complete.

Free Estimate

Free on-site drywall estimates across the GTA

Send your drawings or scope and we'll return a written, itemized drywall quote within 1 business day.

Get a Free Drywall Estimate